Cell Culture devices

5mL replacement syringes for Mirus Evo Pump

Mixed biochip pack; may contain Vena8 Fluoro+; Vena8 Endothelial+ Biochips

Mixed biochip pack; may contain Vena8 Fluoro+; Vena8 Endothelial+ Biochips

2 x VenaT4 biochips.

Reservoir for Pressure Pumps. Compatible with 15mL Sarstedt tubes and 1mL or 2mL Eppendorf tubes; and compatible with UniGo/4U pumps. Plug-and-play interface; suitable for droplet generation, cell culture and autoclaveable; free-standing or optical table mount. PEEK tubing and adapters not included.

Sample reservoir delivers samples from standard Eppendorf tubes (1.5mL or 2mL compatible). For connection to 4U/UniGo pumps (to be pressurized) with PEEK oulet tubing for fluid flow. Plug-and-play interface; suitable for droplet generation and cell culture. PEEK tubing, adapter & eppendorf holder not included.

Tubing kit to connect 4U pressure pump to microfluidic chip via pressurised 15mL reservoir and flow sensor. Suitable for droplet generation applications. Fluid path (x2): • From pump to 15mL Sample reservoir: Blue pneumatic tubing (30cm length) • From 15mL sample reservoir to eac flow sensor: 1/32" black connector (VICI connector) to blue PEEK tubing (50cm length) to 1/32" black connector (VICI connector). • From 80uL/min flow sensor (oil phase) to Cellix's Dropchip: 1/32" black connector (VICI connector) to blue PEEK tubing (50cm length) - directly into DropChip. • From 7uL/min flow sensor (aqueous phase, sample) to Cellix's Dropchip: 1/32" black connector (VICI connector) to red PEEK tubing (50cm length) - directly into DropChip. Tubing / Connector / Adapter specifications: • Blue Pneumatic Tubing: ID: 2.5mm (0.1”); OD: 4mm (5/32”) • Black connector: nut and ferrule, 0.8mm = 1/32" • Blue PEEK Tubing: ID: 0.25mm (0.01”); OD: 0.8mm (1/32”) • Red PEEK Tubing: ID: 0.13mm (0.005”); O

Complete tubing kit for pump including 4x flow sensor tubing kits and 4x culture bottle reservoirs.

Tubing kit to connect ExiGo syringe pump to flow sensor and from flow sensor to input of microfluidic chip. Suitable for low flow rates and general microfluidic applications. Fluid path: • From syringe to flow sensor: Adapter (luer lock ↔︎ 1/32" black connector) to red PEEK tubing (50cm length) to 1/32" black connector . • Flow sensor to chip: 1/32" black connector to red PEEK tubing (50cm length) pushfit to Tygon tubing (5cm length) with stainless steel pin for connection to microfluidic chip. Tubing / Connector / Adapter specifications: • Adapter: luer lock ↔︎ 1/32" black connector • Flow sensor connectors are black nut and ferrule, 0.8mm = 1/32" • Compatible with flow sensors: 1.5μL/min, 7.0μL/min, 80μL/min • Red PEEK tubing: ID: 130μm = 0.13mm; OD: 800μm = 0.8mm = 1/32" • Tygon tubing: ID: 440μm = 0.44mm • Stainless steel pin: 25 gauge thinwall; 17mm length Not suitable for use with whole blood / platelet aggregation / thrombosis assays.