Labelling

BP Fluor 568 Azide is a bright, orange-fluorescent azide-activated probe that reacts with terminal alkynes via a copper-catalyzed click reaction (CuAAC). It also reacts with strained cyclooctyne via a copper-free click chemistry reaction to form a stable triazole and does not require Cu-catalyst or elevated temperatures. BP Fluor 568 is a bright, and highly photostable, orange-fluorescent probe optimally excited by the 568 nm laser line on the Ar-Kr mixed-gas laser. This probe is water-soluble and its fluorescence is pH independent over a wide pH range. The brightness and photostability of this dye are best suited to direct imaging of low-abundance targets. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.

BP Fluor 568 Picolyl Azide is an advanced fluorescent probe that incorporatess a copper-chelating motif to raise the effective concentration of Cu(I) at the reaction site. The rate of CuAAC reaction depends on concentrations of all reagents, including copper, thus the raise of the effective copper concentration at the reaction site dramatically increase the rate of CuAAC reaction without the need to increase concentration of azide reagent and copper. In addition, the use of picolyl azides instead of conventional azides allows for at least a tenfold reduction in the concentration of the copper catalyst without sacrificing the efficiency of labeling. In summary, the introduction of a picolyl moiety into an azide probe leads to a substantial increase in the sensitivity of alkyne detection. This will be of special value for the detection of low abundance targets or where significant increase in signal intensity is desired. Reagent grade, for research purpose. Please contact us for GMP-grad

BP Fluor 568 Alkyne is a bright, orange-fluorescent alkyne-activated probe routinely used for imaging of azide-containing biomolecules. It reacts with azides via a copper-catalyzed click reaction (CuAAC) to form a stable triazole linker. A probe for copper-less detection, BP Fluor 568 DBCO is also available for application where the presence of copper is not acceptable. BP Fluor 568 is a bright, and highly photostable, orange-fluorescent probe optimally excited by the 568 nm nm laser line on the Ar-Kr mixed-gas laser. This probe is water-soluble and its fluorescence is pH independent over a wide pH range. The brightness and photostability of this dye are best suited to direct imaging of low-abundance targets. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.

BP Fluor 568 DBCO reacts with azides via a copper-free “click chemistry” reaction to form a stable triazole and does not require Cu-catalyst or elevated temperatures. In application where the presence of copper is a concern. It is an ideal alternative to copper requiring fluorescent alkynes. BP Fluor 568 is a bright, and highly photostable, orange-fluorescent probe optimally excited by the 568 nm laser line on the Ar-Kr mixed-gas laser. This probe is water-soluble and its fluorescence is pH independent over a wide pH range. The brightness and photostability of this dye are best suit. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.

BP Fluor 594 NHS Ester is the most popular tool for modifying proteins or antibodies through the primary amines (Lys), amine-modified oligonucleotides, and other amine-containing biomolecules with BP Fluor 594 label. The labeling occurs most efficiently at pH 7-9 and forms a stable, covalent amide bond. BP Fluor 594 dye can be used for proteins labeling at high molar ratios without significant self-quenching, enabling brighter conjugates and more sensitive detection. BP Fluor 594 is bright, water-soluble, and pH-insensitive from pH 4 to pH 10 red-fluorescent dye with absorption and emission maxima at 590 and 617 nm, respectively. It can be used with the 561 nm and 594 nm laser lines. BP Fluor 594 dye conjugated to a variety of antibodies, peptides, proteins, tracers, and amplification substrates often used for generation of stable signal in imaging and flow cytometry. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.

BP Fluor 594 TFP Ester is bright, water-soluble, and pH-insensitive from pH 4 to pH 10 red-fluorescent dye often used for modifying proteins or antibodies through the primary amines (Lys), amine-modified oligonucleotides, and other amine-containing biomolecules with BP Fluor 594 label. The labeling occurs most efficiently at pH 7-9 and forms a stable, covalent amide bond. BP Fluor 594 dye can be used for proteins labeling at high molar ratios without significant self-quenching, enabling brighter conjugates and more sensitive detection. TFP (tetrafluorophenyl) ester is an amine-reactive activated ester that reacts with primary amines of biomolecules in the same way as the succinimidyl ester (SE or NHS-ester) to form a stable amide bond. The major advantage of TFP esters over the succinimidyl ester is much improved resistance to spontaneous hydrolysis during conjugation reactions resulting in more efficiency and better reproducible labeling of biopolymers. TFP esters are stable for sever

BP Fluor 594 C5 Maleimide is bright, water-soluble, and pH-insensitive from pH 4 to pH 10 red-fluorescent dye with absorption and emission maxima at 590 and 617 nm, respectively. It can be used with the 561 nm and 594 nm laser lines. BP Fluor 594 dye conjugated to a variety of antibodies, peptides, proteins, tracers, and amplification substrates often used for generation of stable signal in imaging and flow cytometry. The brightness and photostability of this dye are best suited to direct imaging of low-abundance targets. Maleimide is the most popular sulfhydryl-reactive reactive group for conjugating the dye to a thiol group on a protein, oligonucleotide thiophosphate, or low molecular weight ligand. The maleimide group specifically and efficiently reacts with reduced thiols (sulfhydryl groups, –SH) at pH 6.5 to 7.5 to form stable thioether bond. The resulting conjugates exhibit brighter fluorescence and greater photostability than the conjugates of many other spectrally similar fluor

BP Fluor 594 Cadaverine is a carbonyl reactive building block used to modify carboxylic groups in the presence of activators (e.g. EDC, or DCC) or activated esters (e.g. NHS esters) through a stable amide bond. It also can be employed as a polar tracer and as a reactive dye for labeling proteins via a carboxylic acid moiety. BP Fluor 594 is bright, water-soluble, and pH-insensitive from pH 4 to pH 10 red-fluorescent dye with absorption and emission maxima at 590 and 617 nm, respectively. It can be used with the 561 nm and 594 nm laser lines. BP Fluor 594 dye conjugated to a variety of antibodies, peptides, proteins, tracers, and amplification substrates often used for generation of stable signal in imaging and flow cytometry. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.

BP Fluor 594 DBCO reacts with azides via a copper-free “click chemistry” reaction to form a stable triazole and does not require Cu-catalyst or elevated temperatures. In application where the presence of copper is a concern AF 594 DBCO is an ideal alternative to copper requiring fluorescent alkynes. BP Fluor 594 is bright, water-soluble, and pH-insensitive from pH 4 to pH 10 red-fluorescent dye with absorption and emission maxima at 590 and 617 nm, respectively. It can be used with the 561 nm and 594 nm laser lines. BP Fluor 594 dye conjugated to a variety of antibodies, peptides, proteins, tracers, and amplification substrates often used for generation of stable signal in imaging and flow cytometry. Reagent grade, for research purpose. Please contact us for GMP-grade inquiries.